Rmon Event - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

8.2 rmon event

This command adds an event to the RMON event table. The added event is associated with an
RMON event number. The no form of the command deletes an event from the RMON event table.
rmon event <number (1-65535)> [description <event-description (127)>]
[log] [owner <ownername (127)>] [trap <community (127)>]
no rmon event <number (1-65535)>
Syntax Description
Number - Event number
Description - Description of the event
Log - Used to generate a log entry
Owner - Owner of the event
Trap - Used to generate a trap. The SNMP community string is to be passed for the specified
trap.
Mode
Global Configuration Mode
Example
SMIS(config)# rmon event 1 log owner supermicro trap netman
The RMON feature must be enabled for the successful execution of this command.
Related Commands
rmon alarm - Sets an alarm on a MIB object
show rmon - Displays the RMON events (show rmon events)
show snmp community - Configures the SNMP community details
Release : 1.1f 185 / 985