Super Micro Intelligent Switch Command Line Interface User Guide
15.4 set gvrp
This command enables or disables GVRP on a global basis.
set gvrp { enable | disable }
Syntax Description
enable - Enables GVRP in the switch
disable - Disables GVRP in the switch
Mode
Global Configuration Mode
Defaults
enable
Example
SMIS(config)# set gvrp disable
GVRP needs to be explicitly enabled even after GARP is enabled.
Related Commands
show vlan - Displays VLAN information in the database
show vlan device info - Displays the VLAN related global status variables
Release : 1.1f
340 / 985