Enable - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.10 enable

This command turns on privileged commands.
enable [Enable Level <0-15>]
Syntax Description
Enable Level - Level to enter the system
Mode
User EXEC Mode
Level 0 is the most restricted level. User created with level 0 has access only to the
following commands:
- disable
- enable
- exit
- help
- logout
Level 1 includes all user-level commands at the smis> prompt.
Level 15 is the least restricted level and included all commands
It is possible to configure additional access levels (from level 2 to 14) to meet the needs of the
users while protecting the system from unauthorized access.
After a user logs in with a username that has privileges, the full set of CLI commands, including
those in User mode can be accessed
Default Privileged level is assigned by the user
Related Commands
disable - Turns off privileged commands
enable password - Modifies enable password parameters
Release : 1.1f 47 / 985