Spanning-Tree - Properties Of An Interface - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

9.14 spanning-tree - Properties of an interface

This command sets the spanning tree properties of an interface and the no form of the command
sets the spanning tree properties of an interface to default value.
spanning-tree {cost <value(1-200000000)>|disable|link-type{point-
topoint| shared}|portfast|port-priority <value(0-240)>}
no spanning-tree {cost |disable|link-type|portfast|port-priority}
Syntax Description
port-priority - Port priority value
cost - The pathcost value associated with the port
disable - Disables the spanning tree on the port
link-type - The link can be a point-to-point link or can be a shared LAN segment on which
another bridge is present
portfast - Specifies that port has only hosts connected and hence can transition to forwarding
rapidly
Mode
Interface Configuration Mode
Defaults
cost - 2000000
port-priority - 128
portfast - Not in portfast
link-type - shared
Example
SMIS(config-if)# spanning-tree cost 2200
In case of MSTP this configuration applies to the CIST context.
Related Command
show spanning-tree interface - Displays the spanning tree properties of an interface
Release : 1.1f 210 / 985