Radius-Server Host - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

11.1 radius-server host

This command configures the RADIUS client with the parameters (host, timeout, key, retransmit)
and the no form of the command deletes RADIUS server configuration.
radius-server host <ip-address> [timeout <1-120>] [retransmit <1-254>]
key <secret-key-string>
no radius-server host <ip address>
Syntax Description
timeout - The time period in seconds for which a client will wait for a response from the server
before re-transmitting the request.
Retransmit - The maximum number of attempts the client undertakes to contact the server
key - Per-server encryption key. Specifies the authentication and encryption key for all RADIUS
communications between the authenticator and the RADIUS server. The string length is 46.
Mode
Global Configuration Mode
Defaults
Timeout - 3 seconds
Retransmit - 3 attempts
Key - empty string
Example
SMIS(config)# radius-server host 10.0.0.1 key pass
Related Commands
aaa authentication dot1x default - Enables the dot1x local authentication or RADIUS
server based remote authentication method for all ports
show radius server - Displays RADIUS server configuration
show radius statistics - Displays RADIUS statistics
Release : 1.1f 269 / 985