Configuration File Management Commands; Interface Commands - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
ntp broadcast
ntp enable
ntp disable
tz offset
show ntp
clock set
show clock

Configuration File Management Commands

Command
write
set startup-config
copy
copy startup-config
copy- file
erase
list files
show file
show startup-config
show stored-config

Interface Commands

Release : 1.1f
address.
This command enables the SNTP broadcast
client. This is used to enable SNTP client to
accept SNTP traffic from any broadcast server.
This command enables SNTP.
This command disables SNTP.
This command configures the time zone offset
with respect to coordinated universal time
(UTC).
This command displays SNTP configurations.
This command manages the system clock.
This command displays the system date and
time.
Description
Stores running configuration as startup
configuration or into given file name in flash.
This command configures the default
restoration file.
Copies flash files or remote files to flash.
Copies startup configuration to other flash file
or remote flash file.
Copies files from flash to remote vice versa.
Deletes startup configuration file or any flash
file.
Lists all the configuration files stored in flash.
Displays the file contents
Displays the startup config file contents
Displays the given configuration file contents
33 / 985