Tacacs Use-Server Address - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

12.2 tacacs use-server address

This command selects a server from the list of servers maintained in the TACACS client and
makes the TACACS client to use the specified server. The no form of the command disables the
configured TACACS active server.
tacacs use-server address<ip-address>
no tacacs use-server
Mode
Global Configuration Mode
Example
SMIS(config)# tacacs use-server address 10.0.0.100
Related Commands
show tacacs - Displays the statistical log information and server for TACACS client
Release : 1.1f 275 / 985