Show Interfaces - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

13.9 show interfaces

This command displays interface specific port-channel information.
show interfaces [<interface-type> <interface-id> ] etherchannel
Syntax Description
Etherchannel - Interface EtherChannel information
Mode
Privileged EXEC Mode
Example
SMIS# show interfaces gigabitethernet 0/1 etherchannel
Port : Gi0/1
-------------
Port State = Up in Bundle
Channel Group : 2
Mode
: Active
Pseudo port-channel = Po2
LACP port-priority = 128
LACP Port Identifier = 2
LACP Wait-time = 2 secs
LACP Activity : Passive
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing,
LACP Port Admin Oper Port Port
Port State Priority Key Key Number State
-------------------------------------------------------------
Gi0/1 Bundle 128 2 2 0x1 0x3c
SMIS# show interfaces etherchannel
Port : Gi0/1
-------------
Port State = Up in Bundle
Release : 1.1f 294 / 985