Show Mac-Address-Table Static Unicast - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.43

show mac-address-table static unicast

This command displays the statically configured unicast addresses from the MAC address table.
show mac-address-table static unicast [vlan <vlan-id(1-4069)>] [address
<aa:aa:aa:aa:aa:aa>] [{interface <interface-type> <interface-id> }]
Syntax Description
Vlan - VLAN Id
Address - MAC address
interface - Interface type and ID
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show mac-address-table static unicast
Vlan Mac Address RecvPort Status Ports
---- ----------- -------- ------ -----
2 00:11:22:33:44:55 Gi0/2 Del-OnTimeout Gi0/3
Multiple Instance:
SMIS# sh mac-address-table static unicast switch cust1
Switch - cust1
Vlan Mac Address RecvPort Status Ports
---- ----------- -------- ------ -----
1 00:11:22:33:44:55 Gi0/2 Permanent Gi0/3
Total Mac Addresses displayed: 1
If executed without the optional parameters this command displays the MAC address
table for all the available interfaces.
Related Commands
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
Release : 1.1f 393 / 985