Set Garp Timer - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.25

set garp timer

This command configures the GARP join time, leave time, and leave all time in milli-seconds.
set garp timer {join | leave | leaveall} <time in milli seconds>
Syntax Description
join - Join Time
leave - Leave Time
leaveall - Leaveall Time
Mode
Interface Configuration Mode
Defaults
Join - 20
leave - 60
leaveall - 1000
Example
SMIS(config-if)# set garp timer join 500
Leave Timer must be greater than 2 times Join Timer and Leaveall Timer must be greater
than Leave Timer.
Timer values cannot be set to zero.
The GARP timer configuration will be applied to the GARP applications (GMRP and
GVRP) on the specified interface.
Related Command
show garp timer - Displays the GARP timer information of the available interfaces
Release : 1.1f 363 / 985