System Mtu Frame Size - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.62 system mtu frame size

This command configures the maximum transmission unit frame size for all the interfaces in the
system.
The no form of this command removes the configured MTU value on all the interfaces and resets
it to the default value 1500.
system mtu <frame-size(1500-9216)>
no system mtu
Mode
Interface Configuration Mode
Defaults
1500
Example
SMIS(config-if)# mtu 9000
Related Commands
show interfaces - Displays the interface status and configuration
show interface mtu - Displays the global maximum transmission unit
Release : 1.1f 100 / 985