Ip Address Dhcp - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.1 ip address dhcp

This command configures the default management interface to get IP address through DHCP.
The no form of this command configures the default management interface to use static IP
address.
ip address dhcp
no ip address dhcp
Mode
Global Configuration Mode
Defaults
Static IP
Example
SMIS(config)# ip address dhcp
Related Commands
show ip int – Displays the management interface IP information.
Release : 1.1f 38 / 985