Reset-To-Factory-Defaults - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.92 reset-to-factory-defaults

This command clears all the configurations on the switch and resets the switch to factory defaults
configurations.
This command will reboot the switch.
reset-to-factory-defaults [ switch <switch-id] | all]
Syntax Description
<switch-id] - In stacking, the required particular switch can be reset to factory defaults by
specifying the switch id.
all – Use this option to restart all switches in stacking to factory defaults
Mode
Global Configuration Mode
Example
SMIS(config)# reset-to-factory-defaults
Release : 1.1f 132 / 985