Super Micro Intelligent Switch Command Line Interface User Guide
13.6 lacp wait-time
This command sets the LACP wait-time and the no form of the command sets the LACP wait-time
to the default value.
lacp wait-time <0-10>
no lacp wait-time
Mode
Interface Configuration Mode
Defaults
2
Example
SMIS(config-if)# lacp wait-time 1
Configuring the wait-time value as 0 ensures that links get aggregated immediately.
Related Command
show etherchannel - Displays etherchannel detailed / port information
Release : 1.1f
287 / 985