Wildcard Mac-Address - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.12

wildcard mac-address

This command adds wildcard or broadcast MAC address to layer 2 MAC table with the given
interfaces.
The no form of this command removes the wildcard MAC addresses from layer 2 MAC table.
wildcard {mac-adddress <mac_addr> | broadcast} interface
([<interface-type> <0/a-b, 0/c, ...>] [<interface-type> <0/a-b, 0/c,
...>] [port-channel <a,b,c-d>])
no wildcard {mac-adddress <mac_addr> | broadcast}
Mode
Global Configuration Mode
Example
SMIS(config)# wildcard mac-address 03:04:06 int gi 0/1
Related Command
show wildcard - Displays the wildcard entries from layer 2 MAC table.
Release : 1.1f 350 / 985