System Features - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3 System Features

SMIS offers a rich set of system features to a user, such as, login services, copying/writing
facilities, duplex/negotiation support, and many other capabilities. Some features might have
special hardware requirements and others might have special design considerations. The related
command links provide overview descriptions of the features and includes specific information to
consider when using these features.
Management IP Commands
Command
ip address dhcp
ip address
ip gateway
Management Access Commands
Command
login authentication
username
listuser
show users
show privilege
enable password
Release : 1.1f
Description
This command configures the mode by which
the default interface acquires its IP address.
This command configures the IP address and
subnet mask for the default interface.
This command configures the gateway IP
address for the default management interface.
Description
This command sets the authentication method
for user logins and the no form of the command
sets the authentication method for user logins
to default values.
This command creates a user and sets the
enable password for that user with the privilege
level. The no form of the command deletes a
user and disables the enable password for that
user.
This command lists all valid users, along with
their permissible mode.
This command displays information about
terminal lines.
This command shows current user privilege
level.
This command modifies enable password
30 / 985