Show Mac-Address-Table - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.41

show mac-address-table

This command displays the static and dynamic unicast and multicast MAC address table.
show mac-address-table [vlan <vlan-id(1-4069)>] [address
<aa:aa:aa:aa:aa:aa>] [{interface <interface-type> <interface-id> }]
Syntax Description
vlan - VLAN ID
address - MAC address
interface - Interface type and ID
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show mac-address-table vlan 2
Vlan Mac Address Type Ports
---- ----------- ---- -----
2 00:01:02:03:04:21 Learnt Gi0/1
Total Mac Addresses displayed: 1
SMIS# show mac-address-table interface gigabitethernet 0/1
Vlan Mac Address Type Ports
---- ----------- ---- -----
2 00:01:02:03:04:21 Learnt Gi0/1
1 01:02:03:04:05:06 Static Gi0/1
Total Mac Addresses displayed: 2
If executed without the optional parameters this command displays all the static and
dynamic MAC entries.
Related Commands
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
mac-address-table static unicast - Configures a static unicast MAC address in the
Release : 1.1f 389 / 985