Pnac - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

10 PNAC

PNAC (Port Based Network Access Control) is a portable implementation of the IEEE Std 802.1x
PNAC. It can be used in both LAN Switches and Wireless LAN Access Points for providing
security services. When used in LAN Switches, it offers access control to protected resources
existing in the switched network. When used in WLAN Access Points, it not only provides
authentication of the WLAN stations, but also improves the security by making use of the
periodically exchanged key for encrypting the data. PNAC can be very easily ported to different
RTOS environments and interfaced to different switch hardware.
The list of CLI commands for the configuration of PNAC is as follows:
dot1x system-auth-control
aaa authentication dot1x default
dot1x local-database
set nas-id
dot1x default
dot1x max-req
dot1x max-start
dot1x reauthentication
dot1x timeout
dot1x port-control
dot1x access-control
dot1x control-direction
dot1x re-authenticate
shutdown dot1x
debug dot1x
show dot1x
Release : 1.1f 245 / 985