Show Running-Config - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.24 show running-config

This command displays the current operating configuration in the system. This command is
common for both Single Instance and Multiple Instance.
show running-config [{ syslog | dhcp | dvmrp | qos | stp | la | pnac |
igs | | vlan <vlan-id(1-4069)> | interface { port-channel <port-
channel-id(1-65535)> | <interfacetype> <interfacenum> | vlan <vlan-
id(1-4069)> } | ospf | rip | bgp | ipv6 | rip6 | ssh | ssl | acl | ip |
pim | pimv6 | vrrp | snmp | radius | rmon | rm | mbsm | ospf3 | igmp |
igmp-proxy }]
Syntax Description
Syslog - Syslog Module
Dhcp - DHCP Module
dvmrp - DVMRP Module
qos - Quality of Service Module
stp - STP Module
la - LA Module
pnac - PNAC Module
igs - IGS Module
mlds - MLD Snooping Module
vlan - VLAN Module
interface - Port-channel/Physical/VLAN Interface
ospf - OSPF Module
rip - RIP Module
bgp - BGP Module
ipv6 - IPv6 Module
rip6 - RIP6 Module
ssh - SSH Module
ssl - SSL Module
acl - ACL Module
ip - IP Module
pim - PIM Module
vrrp - VRRP Module
snmp - SNMP Module
Release : 1.1f 61 / 985