Switchport Priority Default - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.23

switchport priority default

This command sets the default user priority for the port. The no form of the command sets the
default user priority for the port to the default value.
switchport priority default <priority value(0-7)>
no switchport priority default
Mode
Interface Configuration Mode
Defaults
0
Example
SMIS(config-if)# switchport priority default 5
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
Release : 1.1f 361 / 985