Write - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.45 write

This command writes the running-config to a flash file, startup-configuration file or to a remote
site.
write { flash:filename | startup-config | tftp://ip-address/filename |
usb:filename }
Syntax Description
flash:filename – File name to be written in to flash memory
startup-config - Startup Configuration. If this option is chosen, then the switch will start with
the saved configuration on reboot
tftp - Copies a file to a TFTP server
ip-address - the IP address or host name of the server to receive the file
filename - the name assigned to the file on the server
usb:filename – File name to be written in to external usb memory
Mode
Privileged EXEC Mode
Example
SMIS# write startup-config
A startup-config contains configuration information that the ISS uses when it reboots
TFTP is a simplified version of FTP that allows files to be transferred from one computer to
another over a network, usually without the use of client authentication (for example, username
and password)
Related Commands
show nvram - Displays the current information stored in the NVRAM
show system information - Displays system information
Release : 1.1f 83 / 985