Spanning-Tree Priority - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

9.7 spanning-tree priority

This command sets the Bridge Priority for the spanning tree only in steps of 4096 and the no form
of the command sets the Bridge Priority to the default value.
spanning-tree [mst <instance-id>] priority <value(0-61440)>
no spanning-tree [mst <instance-id(1-64)>] priority
Syntax Description
mst - Range of spanning tree instances
priority - Switch priority for the specified spanning-tree instance
Mode
Global Configuration Mode
Defaults
32768
Example
SMIS(config)#spanning-tree priority 4096
"spanning-tree priority xxx" configures the priority in RSTP, if RSTP is running or configures the
CIST priority if MSTP is running.
"spanning-tree mst instance priority" configures the priority in MSTI and is supported only if MSTP
is running.
Related Commands
show spanning-tree - Detail - Displays detailed spanning tree information
show spanning-tree - Active - Displays spanning tree information of active ports
Release : 1.1f 203 / 985