Dot1X System-Auth-Control - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

10.1 dot1x system-auth-control

This command enables dot1x in the switch and the no form of this command disables dot1x in the
switch.
dot1x system-auth-control
no dot1x system-auth-control
Mode
Global Configuration Mode
Defaults
dot1x is enabled
Example
SMIS(config)# dot1x system-auth-control
It is required to enable authentication, authorization, and accounting (AAA) and specify the
authentication method before enabling 802.1x globally.
802.1x can be enabled on interfaces, which have Port-channel configured.
Related Commands
shutdown dot1x - Shuts down dot1x capability
show dot1x - Displays dot1x information
Release : 1.1f 246 / 985