Shutdown Garp - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.29

shutdown garp

This command shuts down the GARP Module. The no form of the command starts and enables
the GARP Module.
shutdown garp
no shutdown garp
Mode
Global Configuration Mode
Defaults
GARP Module is Started and enabled by default
Example
SMIS(config)# shutdown garp
GARP cannot be started if VLAN is shutdown.
GARP cannot be shutdown if GVRP and/or GMRP are enabled
Related Command
shutdown vlan - Shuts down VLAN switching
Release : 1.1f 367 / 985