Show Logging - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

5.13 show logging

This command displays logging status and configuration information.
show logging
Mode
Privileged EXEC Mode
Example
SMIS# show logging
System Log Information
----------------------
Syslog logging : enabled
Console logging : enabled
TimeStamp option : enabled
Trap logging : Critical
Log server IP : 10.0.0.1
Facility : Default (Mail)
Buffered size : 100
Related Commands
logging - Enables Syslog Server and configures the Syslog Server IP address, the log-level
and other Syslog related parameter
service timestamps - Enables timestamp option for logged messages
Release : 1.1f 169 / 985