Rmon Collection History - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

8.4 rmon collection history

This command enables the collection of MIB history group of statistics on the interfaces.
The no form of this command removes the specified history group of statistics collection from the
interfaces.
rmon collection history <index (1-65535)> [buckets <bucket-number (1-
65535)>] [interval <seconds (1-3600)>] [owner <ownername (127)>]
no rmon collection history <index (1-65535)>
Syntax Description
index – An identifier to refer this history statistics collection configuration. This index is used
while deleting this configuration using the no command.
buckets – Maximum number of buckets needed to hold this history statistics
interval - Time in seconds on which this statistics is collected
owner - Owner of this statistics collection
Mode
Interface Configuration Mode
Example
SMIS(config-if)# rmon collection history 1 buckets 1 interval 10 owner
abc
Related Commands
rmon collection stats - Enables RMON statistic collection on the interface
rmon event - Adds an event to the RMON event table
show rmon - Displays the RMON information
Release : 1.1f 188 / 985