Super Micro Intelligent Switch Command Line Interface User Guide
10.11
dot1x access-control
This command configures the supplicant access control and the no form of the command sets the
access control to inactive.
dot1x access-control {active | inactive}
no dot1x access-control
Syntax Description
active - The port status is the combined port status of the authenticator and supplicant
inactive - The port status is the port status of authenticator
Mode
Interface Configuration Mode
Defaults
inactive
Example
SMIS(config-if)# dot1x access-control active
Related Command
show dot1x - Displays dot1x information
Release : 1.1f
258 / 985