Ports - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.13

ports

This command configures a static VLAN entry with the required member ports, untagged ports
and forbidden ports.
ports <ports-list> {tagged | untagged | forbidden}
no ports [<ports-list>] {tagged | untagged | forbidden}
Syntax Description
<ports-list> - List of member ports – up to three ranges or ports separated by spaces. The
range of ports is provided in a format like gi 0/1-10, which refer to ports from gi 0/1 to gi 0/10. The
ports can be gigabit ethernet, extreme-ethernet, qx-ethernet or port channel interfaces.
tagged – The given ports will be configured as tagged ports to the vlan.
untagged – The given ports will be configured as untagged ports to the vlan.
forbidden – The given ports will be configured as forbidden ports to the vlan.
Mode
Config-VLAN Mode
Example
SMIS(config-vlan)# ports gigabitethernet 0/1 untagged
Related Command
show vlan - Displays VLAN information in the database
Release : 1.1f 351 / 985