Ip Gateway - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.3 ip gateway

This command configures the gateway IP address for the management interface.
The no form of this command will remove the configure gateway IP.
This command works only for the following blade switch models.
SBM-GEM-X2C
SBM-GEM-X2C+
SBM-GEM-X3S+
SBM-GEM-X10SM
For other switch models, use the "ip route" command to configure the required routing
entries with the desired gateway addresses.
ip gateway <ip-address>
no ip gateway
Syntax Description
ip address – Gateway IP address
Mode
Global Configuration Mode
Defaults
0.0.0.0
Example
SMIS(config)# ip gateway 20.0.0.1
Related Command
Displays the management interface IP and gateway information.
show ip int -
Release : 1.1f 40 / 985