Dot1X Reauthentication - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

10.8 dot1x reauthentication

This command enables periodic re-authentication from authenticator to client and the no form of
the command disables periodic re-authentication from authenticator to client.
dot1x reauthentication
no dot1x reauthentication
Mode
Interface Configuration Mode
Defaults
Periodic re-authentication is disabled
Example
SMIS(config-if)# no dot1x reauthentication
The amount of time between periodic re-authentication attempts can be configured by using the
dot1x timeout reauth-period interface configuration command.
Related Commands
dot1x default - Configures dot1x with default values for this port
dot1x timeout - Sets the dot1x timers
show dot1x - Displays dot1x information
Release : 1.1f 254 / 985