Rmon Alarm - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

8.3 rmon alarm

This command sets an alarm on a MIB object. The Alarm group periodically takes statistical
samples from variables in the probe and compares them to thresholds that have been configured.
The no form of the command deletes the alarm configured on the MIB object.
rmon alarm <alarm-number (1-65535) > <mib-object-id (255)> <sample-
intervaltime (1-65535)> {absolute | delta} rising-threshold <value (0-
2147483647)> <rising-event-number (1-65535)> falling-threshold <value
(0-2147483647)> <falling-event-number (1-65535)> [owner <ownername
(127)>]
no rmon alarm <number (1-65535)>
Syntax Description
alarm-number - Alarm Number
mib-object-id - The mib object identifier
sample-intervaltime - Time in seconds during which the alarm monitors the MIB variable
absolute - Used to test each mib variable directly
delta Used to test the change between samples of a variable
rising-threshold - A number at which the alarm is triggered
falling-threshold value - A number at which the alarm is reset
rising-eventnumber - The event number to trigger when the rising threshold exceeds its limit
falling-eventnumber - The event number to trigger when the falling threshold exceeds its
limit
owner - Owner of the alarm
Mode
Global Configuration Mode
Example
SMIS(config)# rmon alarm 1 1.3.6.1.2.1.16.1.1.1.5.2 20 absolute
rising-threshold 15 2 falling-threshold 14 2
The RMON Feature must be enabled for the successful execution of this command
RMON events must have been configured
Release : 1.1f 186 / 985