Show Port-Monitoring - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.83 show port-monitoring

This command displays port-monitoring information.
show port-monitoring
Mode
Privileged EXEC Mode
Example
SMIS# show port-monitoring
Port Monitoring is enabled
Monitor Port : Gi0/2
Port Ingress-Monitoring Egress-Monitoring
Gi0/1 Disabled Disabled
Gi0/2 Enabled Enabled
Gi0/3 Disabled Disabled
Gi0/4 Disabled Disabled
Gi0/5 Disabled Disabled
Gi0/6 Disabled Disabled
Related Command
monitor session - Enables port-mirroring in the switch
Release : 1.1f 123 / 985