Firmware Upgrade - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

3.35 firmware upgrade

This command performs an image download operation using TFTP from a remote location.
firmware upgrade { tftp://ip-address/filename usb:filename } {
flash:filename | flash:fallback }
Syntax Description
tftp://ipaddress/ filename - Source URL alias for a network (tftp) file system
flash:normal – To write into normal flash area.
flash:fallback – To write into fallback flash area.
usb:filename – Firmware image file name in external USB memory
Mode
Privileged EXEC Mode
Example
SMIS# firmware upgrade tftp://20.0.0.1/SWITCH_FIRMWARE_1.0.13-10.bin
flash:normal
The TFTP protocol is used for getting the image from the remote-site.
In case of stacking, firmware upgrade in master, automatically will upgrade firmware in all slave
switches connected in stack. On successful completion of firmware upgrade in slave switches, a
message will be displayed.
Release : 1.1f 73 / 985