Port-Channel Load-Balance - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

13.3 port-channel load-balance

This command sets the load balancing policy and the no form of the command sets the load
balancing policy to the default value.
port-channel load-balance {src-mac | dest-mac | src-dest-mac| src-ip |
dest-ip | src-dest-ip | vlan-id} [ <port-channel-index(1-65535)>]
no port-channel load-balance [ <port-channel-index(1-65535)> ]
Syntax Description
src-mac - Load distribution is based on the source MAC address. Packets from different hosts
use different ports in the channel, but packets from the same host use the same port
dest-mac - Load distribution is based on the destination host MAC address. Packets to the
same destination are sent on the same port, but packets to different destinations are sent on
different ports in the channel
src-dest-mac - Load distribution is based on the source and destination MAC address
src-ip - Load distribution is based on the source IP address
dest-ip - Load distribution is based on the destination IP address
src-dest-ip - Load distribution is based on the source and destination IP address
vlan-id - Load distribution is based on VLAN Identifier
port-channelindex - Port channel number
Mode
Global Configuration Mode
Defaults
source and destination MAC address based
Example
SMIS(config)# port-channel load balance dest-mac 28
If the port-channel index is not mentioned in this command the load-balancing must
apply for all port-channels configured in the system.
Initially, the port channel interface must have been configured for this command.
Release : 1.1f 283 / 985