Mac-Address-Table Static Unicast - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

15.9 mac-address-table static unicast

This command configures a static unicast MAC address in the forwarding database. The no form
of the command deletes a configured static Unicast MAC address from the forwarding database.
mac-address-table static unicast <aa:aa:aa:aa:aa:aa> vlan <vlan-id(1-
4069)> [recv-port <interface-type> <interface-id>] interface
([<interface-type> <0/ab, 0/c, ...>] [<interface-type> <0/a-b, 0/c,
...>] [port-channel <a,b,c-d>]) [status { permanent | deleteOnReset |
deleteOnTimeout }]
no mac-address-table static unicast <aa:aa:aa:aa:aa:aa> vlan <vlan-
id(1-4069)> [recv-port <interface-type> <interface-id>]
Syntax Description
aa:aa:aa:aa:aa:aa - Destination MAC address
vlan - VLAN Identifier
recv-port - Received port's Interface type and ID
interface - Member Ports Interface type and ID. Interface can be of fastethernet type [or
gigabitethernet type]
<interface-type> <0/a-b, 0/c, ...> - Member Ports Interface type and ID. Interface
can be of gigabitethernet type [or fastethernet type]
port-channel - Port-channel ID
status - Status of the Static unicast entry
Mode
Global Configuration Mode
Defaults
status
- permanent
Example
SMIS(config)# mac-address-table static unicast 00:11:22:33:44:55
vlan 3 recv-port gigabitethernet 0/2 interface gigabitethernet
0/1 status deleteOnTimeout
Release : 1.1f 345 / 985