Super Micro Intelligent Switch Command Line Interface User Guide
15.3 map protocol
This command configures the group ID for a specific encapsulation and protocol value
combination. This command adds a protocol to a protocol group for protocol based VLAN
learning. The no form of the command removes the protocol from the entire group.
map protocol {ip | novell | netbios | appletalk | other <aa:aa or
aa:aa:aa:aa:aa>} {enet-v2 | snap | llcOther | snap8021H | snapOther}
protocols-group <Group id>
no map protocol {ip | novell | netbios | appletalk | other <aa:aa or
aa:aa:aa:aa:aa>} {enet-v2 | snap | llcOther | snap8021H | snapOther}
Syntax Description
ip | novell | netbios | appletalk | - Protocol types
other - MAC address of any other protocol type not included in the list
enet-v2 | snap | llcOther | snap8021H | snapOther - Encapsulation Frame Types
protocols-group - Group ID
Mode
Global Configuration Mode
Example
SMIS(config)# map protocol ip enet-v2 protocols-group 1
Related Command
show vlan protocols-group - Displays the protocol group database
Release : 1.1f
339 / 985