Super Micro Intelligent Switch Command Line Interface User Guide
12.1 tacacs-server host
This command configures the TACACS server with the parameters (host, timeout, key). The no
form of the command deletes server entry from the TACACS server table.
tacacs-server host <ip-address> [single-connection] [port <TCP port>]
[timeout <time out in seconds>] [key <secret key>]
no tacacs-server host <ip-address>
Syntax Description
single-connection - Establishes Single TCP connection to communicate with TACACS
Server
port - TCP Port number
timeout - The time period in seconds for which a client will wait for a response from the server
before closing the connection
key - Per-server encryption key. Specifies the authentication and encryption key for all TACACS
communications between the authenticator and the TACACS server. The string length is 64.
Mode
Global Configuration Mode
Defaults
Port - 40
Timeout - 5 seconds
Example
SMIS(config)# tacacs-server host 10.0.0.100 key SuperMicroTACACS
Related Commands
show tacacs - Displays the statistical log information and server for TACACS client
Release : 1.1f
274 / 985