Spanning-Tree Auto-Edge - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

9.13 spanning-tree auto-edge

This command enables automatic detection of bridge attached on an interface and the no form of
the command disables automatic detection of bridge attached on an interface.
spanning-tree auto-edge
no spanning-tree auto-edge
Mode
Interface Configuration Mode
Example
SMIS(config-if)# spanning-tree auto-edge
Related Command
show spanning-tree bridge - Displays the spanning-tree configuration of the bridge
Release : 1.1f 209 / 985