Logging Facility - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

5.6 logging facility

This command configures the syslog facility sent on syslog messages. The no form of this
command configure the syslog facility to the default value local0.
logging facility {local0 | local1 | local2 | local3 | local4 | local5 |
local6 | local7| user}
no logging { <ip-address> | buffered | console | facility | trap | on }
Syntax Description
facility - The facility that is indicated in the message. This can be one of the following values:
local0, local1, local2, local3, local4, local5, local 6, local7 or user.
Mode
Global Configuration Mode
Defaults
facility – local0
Example
SMIS(config)# logging facility local1
Related Command
show logging - Displays Logging status and configuration information
Release : 1.1f 162 / 985