Spanning-Tree Compatibility - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

9.3 spanning-tree compatibility

This command sets the compatibility version for the spanning tree protocol. The no form of the
command sets the compatibility version for spanning tree protocol to its default value.
spanning-tree compatibility {stp|rst|mst}
no spanning-tree compatibility
Syntax Description
mst - MSTP configuration
stp - STP configuration
rst - RSTP configuration
Mode
Global Configuration Mode
Defaults
If Spanning Tree Protocol enabled is mst, then MSTP compatible
If Spanning Tree Protocol enabled is rst, then RSTP compatible
Example
SMIS(config)#spanning-tree compatibility stp
The option mst is available only when MSTP is the operational mode of the spanning tree
Related Commands
show spanning-tree - Detail - Displays detailed spanning tree information
show spanning-tree - Active - Displays spanning tree information of active ports
Release : 1.1f 198 / 985