Set Gmrp - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

15.6 set gmrp

This command enables or disables GMRP globally on the device.
set gmrp { enable | disable }
Syntax Description
enable - Enables GMRP on the device
disable - Disables GMRP on the device
Mode
Global Configuration Mode
Defaults
enable
Example
SMIS(config)# set gmrp disable
GMRP needs to be explicitly enabled even after GARP is enabled.
Related Commands
show vlan - Displays VLAN information in the database
show vlan device info - Displays the VLAN related global status variables
Release : 1.1f 342 / 985