Super Micro Intelligent Switch Command Line Interface User Guide
10.6 dot1x max-req
This command sets the maximum number of EAP (Extensible Authentication Protocol) retries to
the client before restarting authentication process and the no form of the command sets the
maximum number of EAP retries to the client to default value.
dot1x max-req <count(1-10)>
no dot1x max-req
Mode
Interface Configuration Mode
Defaults
Count - 2
Example
SMIS(config-if)# dot1x max-req 5
The default value of this command must be changed only to adjust for unusual circumstances
such as unreliable links or specific behavioral problems with RADIUS server/local clients.
Related Command
show dot1x - Displays dot1x information
Release : 1.1f
252 / 985