Dot1X Re-Authenticate - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
10.13

dot1x re-authenticate

This command initiates re-authentication of all dot1x-enabled ports or the specified dot1x-enabled
port.
dot1x re-authenticate [interface <interface-type><interface-id>]
Syntax Description
Interface - Port number of the interface to re-authenticate
Mode
Privileged EXEC Mode
Example
SMIS# dot1x re-authenticate interface fastethernet 0/1
The command re-authenticates a client without waiting for the configured number of seconds
between re-authentication attempts (re-authperiod) and automatic reauthentication.
If no interface is specified, reauthentication is initiated on all dot1x ports.
Related Command
show dot1x - Displays dot1x information
Release : 1.1f 260 / 985