Switchport Ingress-Filter - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide
15.20

switchport ingress-filter

This command enables ingress filtering on the port. The no form of this command disables
ingress filtering on the port.
switchport ingress-filter
no switchport ingress-filter
Mode
Interface Configuration Mode
Defaults
Disabled
Example
SMIS(config-if)# switchport ingress-filter
When ingress-filtering is enabled, the device discards those incoming frames for VLANs
which do not include this port in its member set.
When the ingress filtering is disabled using the no form of the command, the device
accepts all incoming frames.
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
Release : 1.1f 358 / 985