Set Port-Channel - Supermicro SSE-G48-TG4 Reference Manual

Super Micro Intelligent Switch Command Line Interface User Guide

13.1 set port-channel

This command enables/disables link aggregation in the switch.
set port-channel { enable | disable }
Syntax Description
enable - Enables link aggregation in the switch
disable - Disables link aggregation in the switch
Mode
Global Configuration Mode
Defaults
disable
Example
SMIS(config)# set port-channel enable
Related Command
show etherchannel - Displays etherchannel information
Release : 1.1f 281 / 985