Time Management; Ntp Settings - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Time Management

The Time Management link of the System page opens the Time Management page.
This page allows you to configure QoS through following pages:
•

NTP Settings

• Clock Settings
NTP Settings
Clicking the NTP link brings up the NTP S
the Network Time Protocol (NTP). The parameters for this page are shown in
Table 5-32.
Parameter
NTP Client Settings
NTP Status
Receive Server
Update
Timezone Settings
Hour Offset
Minutes Offset
NTP Servers
Figure 5-39. NTP Settings Page
Table 5-32. NTP Settings Page Parameters
Description
This field enables or disables NTP in the switch. Configure the NTP S
section to enable NTP.
The value for this parameter could be Broadcast or Unicast. To process the
broadcast NTP updates from the server, choose the Broadcast option.
This parameter allows you to enter an hour offset from GMT for local time.
This parameter allows you to enter a minutes offset (after hour offset) from GMT
for local time.
page (Figure
ETTINGS
5-52
5-39), which configures
ERVERS