Snmp Group Access Settings - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

SNMP Group Access Settings

Clicking the G
ROUP
(Figure 5-23), which displays the access rights of groups. Each entry is indexed by a
G N , a Context Prefix, a S
ROUP AME
view name (R
EAD
displays the S
TORAGE
created prior to the Group Access configuration. The parameters for this page are
shown in Table
Table 5-17. SNMP Group Access Settings Page Parameters
Parameter
Group Name
Security Model
Security Level
Read View
Write View
Figure 5-23. SNMP Group Access Settings Page
A tab brings up the SNMP G
CCESS
, W and M
RITE ODIFY
T of the Group Access table. An SNMP Group has to be
YPE
5-17.
Description
This parameter allows you to specify the G
This parameter allows you to specify whether SNMP version v1, v2 or v3 is used.
Version 3 is the most secure model as it allows packet encryption with the private
key word.
With this parameter the no-authentication option disables authentication. The
A option enables Message digest (MD5) or Secure Hash
UTHENTICATION
Algorithm (SHA) packet authentication. The P
A and P
UTHENTICATION
This parameter allows you to specify the R
This parameter allows you to specify the W
M and a S
ECURITY ODEL
) must be used for access control checking. It also
.
RIVACY
EAD
5-36
A S
ROUP CCESS ETTINGS
L
ECURITY EVEL
N string.
ROUP AME
option selects both
RIVATE
V identifier.
IEW
V identifier.
RITE IEW
page
. A proper