Ip Auth Manager - Supermicro SSE-G24-TG4 User Manual

Table 5-6. TACACS+ Server Configuration Page Parameters
Parameter
Timeout
Key Type
Secret Key

IP Auth Manager

Clicking the IP A
(Figure 5-12), which allows you to configure allowed management nodes for managing
the switch. The parameters for this page are shown in
Table 5-7. IP Authorized Manager Page Parameters
Parameter
IP Address
Subnet Mask
Description
The time for which the switch will wait for a response from the TACACS server
before closing the connection is specified with this parameter. It is configurable in
seconds, with the valid range is from 4 to 15 and the default as 5-seconds..
Specifies the Key Type for the TACACS server. The allowed key type is 0 or 7.
The default key type is 0. The key 0 type key is plain text. For key 7 type, the
user must provide the encrypted key string.
This specifies the encryption key for the given TACACS server. It has a
32-character input limit, and the factory default is blank.
Figure 5-12. IP Authorized Manager Page
M tab brings up the IP A
UTH ANAGER
Description
This specifies the IP address of the manager. The default address of 0.0.0.0
indicates "Any Manager".
This specifies the sub-network mask for the specified IP address.
Chapter 5: Web Based Management Utility
UTHORIZED
Table
5-21
M page
ANAGER
5-7.