Punch Horizontal Position Adjustment - Oce cm4521 User Manual

Utility mode

Punch Horizontal Position Adjustment

The horizontal position of punched holes when printing with a Punch setting
can be adjusted for each paper size.
Note
For details on the Punch settings, refer to "Punching holes in copies
(Punch settings)" on page 2-92.
The adjustment range differs depending on the finisher that is installed.
0 Before making any adjustments, use a Punch setting to print a sample
copy. Perform the adjustment while checking the sample that was
created.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [Punch Horizontal Position Adjustment].
– If optional finisher 9821 is installed, select the paper type.
cm4521
11
11-79