Selecting A Paper Setting - Oce cm4521 User Manual

Hide thumbs Also See for cm4521:

Table of Contents

Selecting a Paper Setting

The paper size can be selected automatically according to the document

size or it can be specified manually. Specify the paper size according to the

corresponding procedure, depending on the desired copy settings.

If a setting for special paper is selected for a paper tray, that tray is not

selected automatically with the "Auto" Paper setting. (However, a paper

tray set to "Single Side Only" is given priority to be selected with single-

sided printing.) Be sure to specify a paper setting when special paper is

loaded into a paper tray. For details, refer to "Specifying a setting for spe-

cial paper" on page 6-21.

As the factory default, "Auto" is selected.

The "Auto" Zoom setting and the "Auto" Paper setting cannot both be se-

lected at the same time. If the "Auto" Zoom setting was selected, the

Zoom screen appears. In the Zoom screen, specify the desired Zoom

The paper tray are selected in the following order when the "Auto" Paper

setting is selected.

Tray 1 → Tray 2 → Tray 3 → Tray 4 → LCT (only when LCT is installed)

Basic copy operations